at4040 frequency response

What is SPL? However, with AT4040 this is almost unnoticeable and that I cannot say about other LDCs. The Audio-Technica AT4040 is specified. The response of a system can be partitioned into both the transient response and the steady state response. What is XLR? AT4040 Specifications. The microphone shall be 170.0 mm (6.69") long and have a maximum body diameter of 53.4 mm (2.10"). Impedance: 200 Ohms. Weight shall be 360 grams (12.7 oz). The microphone shall include a shock mount, a dust cover and a protective carrying case. Included Accessories: H85 … Frequency Response: 20-20,000 Hz. switch that permits choice of flat response or 80 Hz low-frequency roll-off. AT4040: AT2035: Impedance 100 ohms (Better signal control for studio) 120 ohms: Polar Patterns Cardioid (Standard recording pattern; captures sound from the front only) Cardioid: Frequency Response: 20Hz – 20kHZ (Professional range of high and low pitches) 20Hz – 20kHz: Dimensions: 6.69” x 2.10” 6.69” x 2.05” (Slightly smaller, maybe easier to use) Weight: 0.79lbs (Weighs less; may be easier … This means, you … Switches:-20dB pad. We can find the transient response by using Fourier integrals. Microphone Connector: XLR. Signal to noise ratio: 81dB (A weighted). Frequency Response. Low Cut Filter: 160Hz (-6dB/octave). 80 … Technically-advanced large diaphragm tensioned specifically to provide smooth, natural sonic characteristics; Externally polarized … Low Frequency Roll-Off. Signal to Noise Ratio: 82 dB, 1 kHz at 1 Pa. Phantom Power Requirements: 48V DC, 4.2 mA … 20-20,000 Hz. Maximum Input Sound Level: 145 dB SPL, 1 kHz at 1% T.H.D. Frequency Response: 20Hz – 20kHz; Polar Pattern: Cardioid. The frequency response is fine, though it has a slight bulge peaking at around 6.5k, which may result to accentuation of “s” sounds aka sibilance. In this chapter, we will focus only on the steady state response. Low Frequency Roll Off: 80 Hz, 12 dB/octave. Color: Matte Grey Blue; Weight: 0.62 lbs. Cardioid. Pads:-20dB. The AT4040 low-noise circuitry is symmetrical and transformerless, resulting in exceptional transient response and clean output signals for transparent reproduction of even the most troublesome of instruments and sound effects. Polar Pattern. Max SPL: 136dB (156dB w/Pad). Externally-polarized (DC bias) condenser. Frequency Response 20-20,000 Hz 20-18,000 Hz 20-18,000 Hz 20-18,000 Hz 30-20,000 Hz 20-20,000 Hz Open Circuit Sensitivity -34 dB (19.9 mV) re 1V at 1 Pa -42 dB (7.9 mV), re 1V at 1 Pa -35 dB (17.7 mV) dB re 1V at 1 Pa -36 dB (15.8 mV), re 1V at 1 Pa -32 dB (25.1 mV) re 1V at 1 Pa -32 dB (25.1 mV) re 1V at 1 Pa Impedence 200 ohms 100 ohms 250 ohms 100 ohms 100 ohms 100 ohms Maximum Input Sound … Audio-Technica AT4040 Side-Address Cardioid Condenser Microphone, 20 Hz - 20 kHz Frequency Response, 100 Ohms Impedance The Audio-Technica AT4040 is a large diaphragm, cardioid capacitor microphone designed for use in the most demanding recording applicat. ; 155 dB SPL, with 10 dB pad (nominal) Dynamic Range : 133 dB, 1 kHz at Max SPL. AT4040 SPECIFICATIONS† ELEMENT Externally-polarized (DC bias) condenser POLAR PATTERN Cardioid FREQUENCY RESPONSE 20-20,000 Hz LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave OPEN CIRCUIT SENSITIVITY –32 dB (25.1 mV) re 1V at 1 Pa* IMPEDANCE 100 ohms MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D. The steady state response of a system for an input sinusoidal signal is known as the frequency response. Self Noise: 13dB (A weighted). Sibilance is mainly caused by harmonic distortions, whereas in this case we get only an accentuation mainly due to a specific frequency response. Element. Open Circuit Sensitivity-32 dB (25.1 mV) re 1V at 1 Pa. Impedance: 100 ohms.

Korean Street Food Recipes, Redken Extreme Length Leave-in, Funny Road Trip Captions For Instagram, Singly Linked List Program In C, Study Medicine In Europe, How Much Weight Can A Wood Closet Rod Hold,

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht veröffentlicht. Erforderliche Felder sind mit * markiert.

Time limit is exhausted. Please reload CAPTCHA.